Showing 1 - 10 of 338
improve significantly the renewable electricity produced, reducing CO2 emissions, and increasing economic and social benefits. …Biomass, integral to life, is one of the main energy sources that modern technologies could widely develop, overcoming … inefficient and pollutant uses. The sugarcane bagasse is one of the more abundant biomass. Moreover, the fluctuating sugar and …
Persistent link: https://www.econbiz.de/10010811424
, with 5%, 10% and 15% (by vol.) ethanol, on the combustion and emissions of a standard, fully instrumented, four … loads. In each test, combustion chamber and fuel injection pressure diagrams are obtained using a specially developed, high … of the history in the combustion chamber of the gross heat release rate and other related parameters reveal some very …
Persistent link: https://www.econbiz.de/10010808277
operate with a finite resource petroleum fuel and emit large amount of harmful emissions. However, this engine configuration … lower thermal efficiency, slower burning rate, and higher CO (carbon monoxide) and HC (unburned hydrocarbon) emissions …
Persistent link: https://www.econbiz.de/10010808280
Plastics have now become indispensable materials in the modern world and application in the industrial field is continually increasing. The properties of the oil derived from waste plastics were analyzed and found that it has properties similar to that of diesel. Waste plastic oil (WPO) was...
Persistent link: https://www.econbiz.de/10010808305
-cylinder pressure and temperature lead to increased NOx emissions while the more advanced combustion assists in the reduction of smoke … emissions, smoke, fuel consumption, engine efficiency, cylinder pressure and net heat release rate are analysed and presented …. The combustion of RME as pure fuel or blended with diesel in an unmodified engine results in advanced combustion, reduced …
Persistent link: https://www.econbiz.de/10010808419
could improve the combustion and emissions performance. … engine. Meanwhile, the HC emissions were averagely decreased by 80% under the pure DME mode. The instantaneous CO and NOx … emissions from the SI DME engine were slightly increased in the initial seconds after the onset of cold start and then markedly …
Persistent link: https://www.econbiz.de/10010808757
stringent emission standards. Apart from air quality related emissions such as nitrogen oxides and particulates, also greenhouse … gas (GHG) emissions are likely to become of more and more importance. Furthermore, oil-based fuel availability might …
Persistent link: https://www.econbiz.de/10010809595
studied. The effects of the use of biodiesel from degraded raw material on combustion in engines are not discussed by …
Persistent link: https://www.econbiz.de/10010809922
increase, CO and HC emissions increase, while NO emissions are reduced. Also, methanol blends are more effective than ethanol … blends for reducing CO and HC emissions, while NO reduction is achieved by ethanol blends. …
Persistent link: https://www.econbiz.de/10010810523
With the increasing concern regarding diesel vehicle emissions and the rising cost of the liquid diesel fuel as well … conventional diesel fuel operation, suffers from low brake engine efficiency and high carbon monoxide (CO) emissions. In order to … exhaust emissions of a PINGD engine, a theoretical investigation has been conducted by applying a comprehensive two …
Persistent link: https://www.econbiz.de/10010810634