Showing 1 - 10 of 24
Stearic acid/expanded graphite composites with different mass ratios were prepared by absorbing liquid stearic acid …, crystalline phase, microstructure and thermal diffusivity of the composites, respectively. The thermal properties and thermal … approximately the same as the values calculated based on the weight fraction of the stearic acid in the composites. The …
Persistent link: https://www.econbiz.de/10010808523
Tidal turbine blades are subjected to significant thrust and torsional loadings due to the high density of the seawater in which they operate. These thrust loadings lead to high bending moments at the blade root, which can prove to be a serious design constraint for these devices and can have...
Persistent link: https://www.econbiz.de/10011044383
In this paper we are concerned with the elliptic PDEs with highly oscillating coefficients which model the behaviour of composite linear elastic materials. Analytical expressions for the effective coefficients are obtained for the case of layered materials using the theory of homogenisation....
Persistent link: https://www.econbiz.de/10011050490
The inspection of damages detected in some blades of 300kW wind turbines revealed that the nature of these damages was probably due to a fatigue mechanism. The causes that had originated the failure (superficial cracks, geometric concentrator, abrupt change of thickness) have been studied,...
Persistent link: https://www.econbiz.de/10011052959
crystalloid phase of palmitic acid/GO composites, respectively. DSC (Differential scanning calorimeter) test was done to … prepared form-stable composites as highly conductive PCMs for thermal energy storage applications. …
Persistent link: https://www.econbiz.de/10011053239
Shape-stabilized fatty acid eutectics/carboxy methyl cellulose-1 composites as phase change materials (PCMs) were … composites melt at 32.2 °C with latent heat of 114.6 kJ/kg and solidify at 29.2 °C with latent heat of 106.8 kJ/kg. The thermal … cycling test proves that the composites have good thermal reliability. It is envisioned that the prepared shape …
Persistent link: https://www.econbiz.de/10011190869
We investigate the conductivity variation with density of compacted vapour-grown carbon fibre (VGCF). The results indicate a typical transition between a non-linear domain at low compaction conditions and a regime where the conductivity increases roughly linearly with density when the sample is...
Persistent link: https://www.econbiz.de/10010587170
Fractal nanostructured materials, such as nanocomposites and self-affine thin films, are shown to possess giant optical nonlinearities. The enhancement results from the sub-wavelength localization of dipolar modes and strong local field fluctuations.
Persistent link: https://www.econbiz.de/10010587380
The electrical resistance of a percolating medium made of a polymer filled with conductive particles may undergo a steep increase over a narrow temperature range above room temperature. A likely mechanism for the effect is the loss of interparticle contact inducing a weakening of the...
Persistent link: https://www.econbiz.de/10010587605
When two or more different materials are combined to form composites, the property of the composite may be quite …. We study crack formation in composites through a very general spring network model on a square lattice. The spring model …
Persistent link: https://www.econbiz.de/10010590465