Dynamic insulation, a form of ‘Breathing Wall’ construction which allows the movement of air and moisture through the external walls of a building, was seen as one possible method for reducing building envelope heat losses and achieving high indoor air quality. A research investigation was...

In the present work, gas turbine cycles are modified with steam injection between the combustion chamber exit and the gas turbine inlet. Heat recovery steam generators, utilising the exhaust gases, provide these cycles with the injected steam at saturated vapour. The irreversibility of the...

Spring harvested corn stover was used for direct combustion in a 146 kW dual chamber boiler designed for wood logs. Stover had a very low moisture content (6.83 ± 0.17%), a gross calorific value (GCV) of 18.57 MJ/kg of dry matter (±0.32 MJ/kg DM) and an ash content of 5.88% (±1.15%). Small...

Nowadays, on average, two thirds of the fuel energy consumed by an engine is wasted through the exhaust gases and the cooling liquid. The recovery of this energy would enable a substantial reduction in fuel consumption. One solution is to integrate a heat recovery system based on a steam Rankine...

The aim of this paper is the determination of a concentrating thermo-photovoltaic (CPV/T) system dynamic model by means of the finite element method (FEM). The system consist of triple-junction InGaP/InGaAs/Ge (indium-gallium phosphide/indium-gallium-arsenide/germanium) solar cells connected to...

This paper presents a model of a power plant condenser cooling circuit which has in addition to the classical cooling scheme heat pumps for waste heat recovery. Major source of loss for a thermal power plant is the heat rejected by the condenser which can be up to 48.9% of thermal energy at...