composition of the coating was γ-Al2O3. SEM showed that the coating surface was porous, and the pore diameter was in the range of … 1–5 μm. The cross-section view by EDS indicated that the coating matrix is quite dense, and there are few defects …. Phosphorus from the applied electrolyte could be incorporated into the coating during the PEO process. A transitional zone with a …

. TiCN coating was first fabricated using reactive plasma spraying (RPS) technology in the reactive chamber that was filled … analyzed by SEM and XRD. More chemical information of surface was analyzed by XPS. The Vickers microhardness of TiCN coating is … 1659.11 HV100g, and the cross-section of the coating shows a conspicuous phenomenon of indentation size effect. …

desired phase, high crystallinity, adequate porosity, and good biocompatibility. The characteristics of the HA coating are … microstructure of the HA coating, and introduces several typical HA coatings fabricated with different plasma spraying parameters. …

SiC coating for carbon/carbon composites was prepared by pack cementation method. The effects of coating process on the … the infiltrated Si improved the interfaces bonding during the coating process, the flexural strength and flexural modulus …

that the coating quality is good with optimal laser parameters and coating compositions; whereas the cracks formed in the … coating with high content of ceramic phases mainly include the following: the transcrystalline cracks in the bonding metal … matrix, the high density cracks in the edge of the coating, micro-cracks on the interface of the matrix and the hardy ceramic …

A deposition process for coating concrete surface was presented in this study. This can be accomplished by feeding a … are capable of coating the concrete surface and that this technique is effective for the improvement of the impermeability …

-like network, branched structures with less bundling, thus, strongly suggesting a firm coating of the polymer on nanotube walls …. The coating was further confirmed by transmission electron microscopy. The thermal properties of the nanotube complex as … studied by thermal gravimetric analysis (TGA) revealed that coating enhanced stability of the complex, when compared to that …

Electrophoretic deposition (EPD) is a good method in the fabrication of the coating materials. Its processing …

. With optimum fin efficiency and superior absorptive coating quality, useful energy losses can be minimized. Some important …

the efficiency or even stop the production of energy. A superhydrophobic coating has been proposed as a functional coating … for use in solar cell and outdoor applications. A review of the literature has revealed that a superhydrophobic coating … of a superhydrophobic coating can prevent and reduce the accretion of ice, while subsequently the ice resistant …