Pyrolysis experiments have been conducted on a sample of rapeseed to determine particularly the effects of pyrolysis … temperature, heating rate, particle size and sweep gas flow rate on the pyrolysis product yields and their chemical compositions …. The maximum oil yield of 73% was obtained at the final pyrolysis temperature of 550–600 °C, particle size range of +0 …

obtain coal/biomass blends for co-pyrolysis runs. Effects of HS present in the blends were evaluated regarding the apparent …

The pyrolysis characteristics of construction waste wood were investigated for conversion into renewable liquid fuels …. The activation energy of pyrolysis derived from thermogravimetric analysis increased gradually with temperature, from 149 … decomposed slowly. The yield and properties of pyrolysis oil were studied using two types of reactors, a batch reactor and a …

Fixed-bed pyrolysis experiments have been conducted on a sample of cottonseed cake to determine the possibility of … Heinze retort. Pyrolysis atmosphere and pyrolysis temperature effects on the pyrolysis product yields and chemical … composition have been investigated. The maximumm oil yield of 29.68% was obtained in N2 atmosphere at a pyrolysis temperature of …

bio-oil and combustible gas, and a direct contacting continuous operational pyrolysis reactor was designed to evaluate the … feasibility. In addition, the influences of temperature and particle size of BF slag on pyrolysis characteristics of biomass were … discussed. The results showed that bio-oil production by pyrolysis of biomass using waste heat from hot BF slag was reliable. In …

Kinetic tests on pyrolysis of the mixture of waste automobile lubricating oil (WALO) and polystyrene (PS) were carried … energies for the pyrolysis of WALO/PS mixture were in the range of 176 kJ mol−1–369 kJ mol−1 at various conversions of 1 … styrene monomer was high for the pyrolysis of the WALO/PS mixture. …

pyrolysis. Pyrolysis characteristics of palm fiber were studied by using thermogravimetric analysis in the temperature range of …, 350 and 360 °C with various retention times from 1 to 5 min. The influence of the pyrolysis conditions on the product … pyrolysis at 360 °C for 5 min. The gas product was analyzed by GC with FID detector. The reaction pathway was investigated based …

study investigates the evolution, and heating value, of syngas derived from microwave-induced plasma pyrolysis of waste …. Three triplicate commercial and industrial waste samples were treated under pyrolysis conditions for 25–30 min. Analysed …. Syngas heating value was determined to range from 11.39 MJ/Nm3 to 17.44 MJ/Nm3, consistent with other pyrolysis studies. …