Showing 1 - 10 of 39
stability at 110 °C with a minimum induction time of 6 h by the Rancimat method (EN-14112). According to proposed National … specification for neat Jatropha biodiesel and metal contaminated Jatropha biodiesel by using antioxidants; it will have a cost … implication, as antioxidants are costly chemicals. Research was conducted to increase the oxidation stability of metal …
Persistent link: https://www.econbiz.de/10011055430
This study investigates the impact of various synthetic phenolic antioxidants on the oxidation stability of biodiesel … blends with the employment of the modified Rancimat method. The experimental results revealed that an improvement in … oxidation stability could be achieved with all antioxidants tested. Butylated hydroxytoluene (BHT) and butylated hydroxyanisol …
Persistent link: https://www.econbiz.de/10010810548
stability of 3.95 h and research was conducted to investigate the influence of natural and synthetic antioxidants on the … oxidation stability of jatropha methyl ester. Antioxidants namely α-tocopherol, tert-butylated hydroxytoluene, tert … stability. It was found that both types of antioxidants showed beneficial effects in increasing the oxidation stability of …
Persistent link: https://www.econbiz.de/10011053565
formation which can plug nozzles and filters. This work focuses on the effect of the addition of antioxidants on EURO-III and … antioxidants. BHA (butylated hydroxy anisole), BHT (butylatedhydroxy toluene), TBHQ (tert-butylhydroxyquinone) and DPA … (diphenylamine) were the antioxidants used for this study. The rate of change in kinematic viscosity and density of EURO …
Persistent link: https://www.econbiz.de/10010810985
This investigation explores the influence of oxygenated fuels on different energy and exergy parameters first and the second law of thermodynamics. The parameters were estimated based on the experimental data using thermodynamic Equations. Due to similar fuel properties to diesel, a...
Persistent link: https://www.econbiz.de/10012652443
In this study, regulated and unregulated exhaust emissions with petroleum diesel fuel and Jatropha-based biodiesel blends at proportions of 5%, 10%, 20%, 50% and 100% (v/v) have been investigated. This study examines four regulated emissions: nitrogen oxide, carbon monoxide, unburned hydrocarbon...
Persistent link: https://www.econbiz.de/10010811313
This investigation explores the influence of oxygenated fuels on different energy and exergy parameters first and the second law of thermodynamics. The parameters were estimated based on the experimental data using thermodynamic Equations. Due to similar fuel properties to diesel, a...
Persistent link: https://www.econbiz.de/10012220520
The study of effect of injection timing along with engine operating parameters in Jatropha biodiesel engine is important as they significantly affect its performance and emissions. The present paper focuses on the experimental investigation of the influence of injection timing, load torque and...
Persistent link: https://www.econbiz.de/10010572039
In this work, hydrotalcite-derived particles with Mg/Al molar ratio of 3/1 were synthesized by a coprecipitation method using urea as precipitating agent, subsequently with (MHT) microwave-hydrothermal treatment, and followed by calcination at 773 K for 6 h. These particles were micro-sized...
Persistent link: https://www.econbiz.de/10011055167
Continued legislative pressure to reduce exhaust emissions from CI (compression ignition) has resulted in the development of advanced fuel injection equipment. This advanced injection system produces higher temperatures and pressures at the injector tip, where deposit formation is initiated. In...
Persistent link: https://www.econbiz.de/10011055487