The thermal reactivity and kinetics of four coal chars (HVN, UM, SAB and BA) in an oxy-fuel combustion atmosphere (30%O2–70%CO2) were studied using a thermobalance. The coal chars were obtained by devolatilization in an entrained flow reactor (EFR) at 1000°C for 2.5s under 100% N2 and CO2...

The ignition temperature and burnout of a semi-anthracite and a high-volatile bituminous coal were studied under oxy-fuel combustion conditions in an entrained flow reactor (EFR). The results obtained under oxy-fuel atmospheres (21%O2–79%CO2, 30%O2–70% O2 and 35%O2–65%CO2) were compared...

The ignition temperature, burnout and NO emissions of blends of a semi-anthracite and a high-volatile bituminous coal with 10 and 20 wt.% of olive waste were studied under oxy-fuel combustion conditions in an entrained flow reactor (EFR). The results obtained under several oxy-fuel atmospheres...

The devolatilisation step of coal is a vital stage in both air–coal and oxy-coal combustion and there is interest in whether methods of estimating the reaction parameters are similar for both cases. A network pyrolysis model, the FG-DVC (Functional Group-Depolymerisation Vaporisation...

The deployment of oxy-fuel combustion in utility boilers is one of the major options for CO2 capture. However, combustion under oxy-firing conditions differs from conventional air-firing combustion, e.g., in the aspect of radiative heat transfer, coal conversion and pollutants formation. In this...

The current situation in the energy sector suggests the possibility of using biomass in co-combustion systems as an alternative to other fuels. In the case of the North of Spain the amount of forest residues that is generated guarantees it as a valuable source of energy for the future. However,...

There is an urgent need to develop materials and processes that reduce the energy penalty associated to the CO2 capture step. Biochars are appealing adsorbents for post-combustion CO2 capture applications due to their low cost, stability in moisture conditions and microporous nature. Series of...

In this work spent coffee grounds from single-use capsules were used as the starting material for producing low-cost activated carbons. The activation conditions were selected and optimised to produce microporous carbons with high CO2 adsorption capacity and selectivity, thus with potential to...

The main drawbacks of developing carbon adsorbents from pine sawdust, an abundant biomass feedstock, are the low carbon yield of the process and the poor mechanical properties of the resulting carbons. In an attempt to overcome these limitations, the effect of the addition of coal tar pitch was...