This study presents test results of a Stirling engine with a lever controlled displacer driving mechanism. Tests were conducted with helium and the working fluid was charged into the engine block. The engine was loaded by means of a prony type micro dynamometer. The heat was supplied by a...

The present work developed a prototype Stirling engine working at the moderate temperature range. This study attempts to demonstrate the potential of the moderate temperature Stirling engine as an option for the prime movers for Concentrating Solar Power (CSP) technology. The heat source...

In this study, a gamma type Stirling engine with 276 cc swept volume was designed and manufactured. The engine was tested with air and helium by using an electrical furnace as heat source. Working characteristics of the engine were obtained within the range of heat source temperature 700–1000...

In the recent years, numerous studies have been done on Stirling cycle and Stirling engine which have been resulted in different output power and engine thermal efficiency analyses. Finite speed thermodynamic analysis is one of the most prominent ways which considers external irreversibilities....

The goals of the project were the design, construction and operation of a Stirling engine, which is heated by the flue gas of a biomass furnace. The α-type Stirling engine was selected for cost reasons, because many parts from industrial mass production can be used. The necessary maintance and...

With the aim of improving the performance of Stirling engines for applications with relatively low maximum temperatures (150 °C–300 °C), working fluids that have noticeable real gas effects have been considered.

An integrated gasification solid oxide fuel cell (SOFC) and Stirling engine for combined heat and power application is analyzed. The target for electricity production is 120 kW. Woodchips are used as gasification feedstock to produce syngas, which is then used to feed the SOFC stacks for...