Metallic bipolar plates for polymer exchange membrane (PEM) fuel cells are currently manufactured by stamping of thin sheets. However, there are dimensional and shape errors of microchannels because of forming limitation such as spring back of thin sheets after stamping. On the other hand,...

Biodiesel consists of fatty acid monoalkyl esters and is derived from feedstocks, such as vegetable oils, used cooking oils and animal fats. Biodiesel is considered to be a promising alternative biofuel. Recently, biodiesel has received additional attention and intense research has been...

The present study deals with the production of biodiesel using waste fish oil. The research assesses the effect of the transesterification parameters on the biodiesel yield and its properties, including temperature (40–60 °C), molar ratio methanol to oil (3:1–9:1) and reaction time...

Fatty acid methyl esters prepared from canola, palm, soybean, and sunflower oils by homogenous base-catalyzed methanolysis were stored for 12 months at three constant temperatures (− 15, 22, and 40 °C) and properties such as oxidative stability, acid value, kinematic viscosity, low...

Due to the energy crisis caused by the progressive depletion of fossil fuel sources, the search for alternative fuels from renewable sources is in growing demand. Therefore, the manufacturing of biodiesel from fish waste might help the environment as an alternative for the reduction of residues...

This paper presents a multi-criteria economics, environment, and thermodynamics assessment for a combined cooling, heating, and power (CCHP) system consist of a heat recovery system, a small absorption chiller, a 5kW PEMFC stack, gas compressor, and a humidifier. This study presents an improved...

This paper presents a multi-criteria economics, environment, and thermodynamics assessment for a combined cooling, heating, and power (CCHP) system consist of a heat recovery system, a small absorption chiller, a 5kW PEMFC stack, gas compressor, and a humidifier. This study presents an improved...

Using experimental study results, this paper aims at evaluating the different analytical models that are used for modeling Proton Exchange Membrane Fuel Cell Stack (PEMFC). Three static models such as those of Amphlett, Larminie–Dicks and Chamberlin–Kim are demonstrated. These models are...

A portable system for power generation based on hydrogen and a single proton exchange membrane fuel cell (PEMFC) has been built and operated. The fuel cell is fed in the anode with hydrogen stored in a metal hydrides cartridge, and in the cathode with oxygen from quiescent ambient air (‘air...