Si-STEEL THIN-STRIP PREPARED BY TWIN-ROLL CONTINUOUS CASTING
The fabrication process of Si-steel thin-strip by twin-roll continuous casting was described and the quality of the obtained Si-steel thin-strip was measured. Si-steel strips with 0.5–6.5 wt.% Si content were successfully prepared, and proper parameters including pouring temperature, height of molten pool, casting speed and pouring head mode were optimized, and their mechanisms were discussed. The relationship between quality factors of Si-steel including cracks, strip thickness, impurity and process parameters such as Si content and so on were discussed. The morphologies of the strips with different Si content were studied.
Year of publication: |
2011
|
---|---|
Authors: | YI, YU ; ZHOU, ZEHUA ; WANG, ZEHUA ; JIANG, SHAOQUN ; HUANG, WEIDONG |
Published in: |
Surface Review and Letters (SRL). - World Scientific Publishing Co. Pte. Ltd., ISSN 1793-6667. - Vol. 18.2011, 03, p. 97-102
|
Publisher: |
World Scientific Publishing Co. Pte. Ltd. |
Subject: | Twin-roll continuous casting | thin-strip | Si-steel |
Saved in:
Online Resource
Saved in favorites
Similar items by person
-
MICROWAVE ABSORPTION PROPERTIES OF β-SiC–C COMPOSITES WITH SOLID PHASE SINTERING AT X BAND
ZHOU, ZEHUA, (2005)
-
Religion and perceptions of the regulation of controversial advertising
Wang, Zehua, (2018)
-
ZrO2-Al2O3 LAMINATED CERAMICS AND THEIR TRIBOLOGICAL BEHAVIORS
ZHOU, ZEHUA, (2005)
- More ...